Pacific Abrasive "The Hammer" Pneumatic Chisel

Sku: ATD178

Call for Pricing

Pacific Abrasives The Hammer Pneumatic Chisel #ATD178

The HAMMER and 3 assorted tips (Hoses and fittings are not provided).

The chisel has been designed exclusively for deflasking and working stone models. It is a very smooth operating tool with low vibration, low maintenance, and can save up to 80% of the deflasking time. The lightweight and ergonomically designed tool provides good hand control during usage and helps ensure against breakage. The pneumatic functioning system guarantees a long useful life.

CONTENTS: The HAMMER and 3 assorted tips (Hoses and fittings are not provided).

OPERATING PRESSURE: 5-6 atm. Operates on approximately 90 psi. Consumes: 40 – 50 liters of air per minute.

MAINTENANCE: Since the compressor creates condensation, the tool must be lubricated (even if the compressor is fitted with a filter) once a week with a few drops of quality hand piece oil. Apply the oil to the lubrication point and leave the tool in a vertical position when not in use. Sharpen the chisel occasionally, as tools must be kept sharp. No further maintenance is required.

WARRANTY: 1 year from date of invoice (the warranty is valid only if the tool is used in the above conditions).

Sku: ATD178
Barcode: N/A
Product vendor
Product collections